Series 1250CRH

» »

Electrical Characteristics Maximum Ratings	Symbol	Units
RMS Forward Current	IT (RMS)	A	1,965
Average Forward Current	IT (AV)	A	1,250
Peak One-cycle Surge @ 8.3ms.	IT SM	A	27,000
I2t @ 8ms.	I2t	A2/sec	3,040,000
Maximum Forward Voltage Drop @ 25°C at Noted Amps	VTM	V A	160
Maximum Forward Voltage Drop @ 25°C at Noted Amps	VTM	V A	2,500
Maximum Voltage Ratings	VRRM VDRM	V	2,400
Maximum Thermal Resistance Junction to Case		°C/W	0.03
Maximum Rate of Rise on State Current (non-rep.)	di/dt	A/µ sec.	600
Minimum Critical Exponential Rate of Rise Off - State Voltage	dv/dt 125°	V/µ sec.	200
Maximum Gate Voltage to Trigger	VGT	V	3.00
Maximum Non Triggering Gate Voltage	VGD	V	0.15
Typical Gate Current to Trigger	IGT	MA	150
Maximum Turn Off Time 200 Volts/µ second reapplied	Tq	µ second	250 TYP
Mechanical Characteristics For Tq Add Letter "X" and Turn Off time After Voltage
Mounting Torque	-----	inch Lbs.	-----
Thread Size	-----	-----	-----
Mounting Force PSI Gauge	MIN	Lbs.	5,000
Mounting Force PSI Gauge	MAX	Lbs.	6,000

Maximum Operating Temperature on All SCRs (TJ)=125°C

SCR NOMENCLATURE

All SCRs are negative base. Flat packs have one polarity, to reverse, point the arrow of the polarity sign to the side you want positive. When the amperage of the device is unknown, check the stud or puck size and select a device of the same size with the highest rating available. When the voltage of the device is unknown, use the transformer secondary voltage or the dc voltage times 2.5 for device voltage.

	Quantity: